9.5ti THERMOMETRIC SELF-RECOVERY WINCH
The 9.5ti packs 9500 lbs of pulling capacity into
a massive 12.5 lb aluminium die-cast body. This winch
not only looks great, but sheds the elements like no other
winch on the market: seals at the key points give
extreme-duty water resistance. A Gen II Series Wound motor
delivers just the right balance between torque and speed.
Plus another Warn Industries first - operator feedback - the
thermometric indicator gives the operator information about
motor temperature during the winching operation.
This is the same winch that we fitted on our Yellow Wrangler Project vehicle, but we can supply any Warn products, call for your requirements.
| 9.5ti SPECS/PART NUMBERS |
| Part Number: PN 67550 (12V DC) |
| Rated Line Pull: 9500 lbs. (4310 kgs.) single-line |
| Motor: Gen II, Series WoundTM |
| Remote Control: Remote switch, 12' (3.7m) lead, thermometric indicator, S2 elements, integrated flashlight |
| Geartrain: 3-Stage Planetary |
| Gear Ratio: 156:1 |
| Lubrication: Aeroshell #17 |
| Clutch (freespooling): Sliding Ring Gear |
| Brake: Automatic Direct Drive Cone |
| Drum Diameter/Length: 2.5"/9.0" (6.4cm/23cm) |
| Weight: 89 lbs. (36.3kgs.) |
| Wire Rope: 125', 5/16" diameter (30m, 8mm diam.) |
| Fairlead: Roller |
| Recommended Battery: 650 CCA minimum for winching |
| Battery Leads: 2 gauge, 72" (1.83m) |
| Finish: Chromate with high-gloss powder coat |
| Nuts/Bolts: PN 39570 |
| 12V DC PERFORMANCE SPECS | |||
| Line Pull Lbs.(Kgs.) |
Line Speed FT./min(M/min.) |
Motor Current |
Pull by layer layer/Lbs(Kgs.) |
| 0 | 62(18.9) | 47 amps | 1/9500(4313) |
| 2000(910) | 16.3(4.97) | 160 amps | 2/8650(3927) |
| 4000(1810) | 11.8(3.60) | 230 amps | 3/7920(3595) |
| 6000(2720) | 9.31(2.84) | 305 amps | 4/7400(3359) |
| 8000(3630) | 7.59(2.31) | 370 amps | 5/6940(3150) |
| 9500(4310) | 6.67(2.03) | 425 amps | |
| Above performance specs are based on first layer of drum | |||
Winch Dimensions: 23.1" L. x 6.3" D. x 10.0" H.
(587mm L. x 160mm D. x 254mm H.)
Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm)
Last Updated 29th July 2007,
© copyright 1998 - 2007
F.T.E. 4x4 Specialist's Ltd.
info@fte.co.uk